Precautions during the installation process of colored painted ridge tiles

Color coated ridge tiles are lightweight building materials that are easy and fast to install. However, during construction, it is important to strictly follow the relevant installation guidelines to avoid unnecessary rework and maintenance issues during roof installation.

Precautions during the installation process of painted ridge tiles:

1. The color coated ridge tiles are lightweight and have a clever structural design, making the installation process relatively simple. But during installation, be careful not to walk on the tiles as much as possible. If you need to move on tiles, first of all, take safety measures. When walking, be sure to step on the middle part, and do not step on the edge of the colored steel tiles. Firstly, it is not load-bearing enough, and secondly, it is easy to slip, which may cause dangerous consequences.

2. When installing colored painted ridge tiles, attention should be paid to the weather conditions and installation should not be carried out in adverse weather conditions, which can cause great inconvenience. In addition, the construction personnel must be professionals.

3. The skeleton structure used for the installation and construction of colored painted ridge tiles must be firmly constructed, and protection and safety warnings must be taken below to avoid accidental falling of objects and harm to pedestrians. If there is a high flow of people near the construction site of painted ridge tiles, it is recommended to arrange a person on the ground to guide and remind passersby.

4. Before starting to install the color coated ridge tiles, the construction personnel first choose the laying method of the tiles. Generally, the laying methods of tiles include overlapping and staggered. If the length of the house is less than 15m, overlapping can be used, while for roofs larger than 15m, staggered can be used.

5. Once the installation method is confirmed, start installing the sealing strip. The construction worker separates the sealing strip in half, and then presses it against the roof using the color coated ridge tiles. After covering the ridge tiles, they are fixed with special nails. The junction of the side tiles is sealed with cement and directly covered with colored ridge tiles.

6. The connection of the inclined surface needs to be cut according to the angle and length of the painted ridge tiles, and then installed with water treatment at the bottom, followed by finishing treatment with waterproof adhesive or cement.

7. When the construction worker is doing waterproofing treatment for the protruding part, they select the appropriate waterproof material and size, then install it at the water connection point and lay colored painted ridge tiles on it.

8. After installation, the color coated ridge tiles need to be fixed in the middle of the tile bones with special nails to have a waterproof effect. Usually, the spacing between the special nails is about 0.5m horizontally and vertically, and the special nails should be fixed from the lower end of the color coated ridge tiles towards the roof direction to have a beautiful and neat effect.