Do not delete those with high parallax!!

Introduction to the laying and installation process of colored painted ridge tiles


Summer is rainy, and the color coated ridge tiles are soaked in rainwater for too long. In addition, the acidic and alkaline corrosion from industrial discharge in industrial areas can cause rust and water leakage, and in severe cases, the entire color coated ridge tiles can fall off, thereby affecting normal work.

 

Summer is rainy, and the color coated ridge tiles are soaked in rainwater for too long. In addition, the acidic and alkaline corrosion from industrial discharge in industrial areas can cause rust and water leakage, and in severe cases, the entire color coated ridge tiles can fall off, thereby affecting normal work. Therefore, the waterproof repair and maintenance work of color coated ridge tiles is very important in extending their service life. Let's take a brief look at the main causes of water leakage in the color coated ridge tile roof, and set the waterproof repair method for the color coated ridge tile based on the causes.

The areas where leakage is prone to occur on the roof of the painted ridge tile are subject to systematic waterproofing treatment, mainly including screw holes and overlapping joints of the painted ridge tile. The color coated ridge tile roof is long-term affected by the environment and climate, causing long-term wear and tear at the nail holes and joints, resulting in damage to the color coated ridge tile. This cycle can cause serious water leakage.

The waterproof repair method for color coated ridge tiles can use metal roof waterproof coating combined with polyester cloth or self-adhesive waterproof membrane construction to seal all areas where water may seep on the color coated ridge tiles. The metal roof waterproof coating adopts pure acrylic acid, which has the characteristics of sun protection and fast heat dissipation, and can protect the waterproof layer. It can also firmly adhere to the roof according to the height fluctuations of the painted ridge tiles, allowing the painted ridge tiles to be completely isolated from the air and achieve waterproof and anti-corrosion effects. The waterproof repair method of color coated ridge tiles can also use cold construction technology, without the need for open flame construction.

In addition, if the color coated ridge tiles are subjected to waterproof treatment, the waterproof surface will generally be increased, and the joints, bolts, etc. of the color coated ridge tiles also need to be waterproof treated. The quality of color coated ridge tiles must be selected well, and the coating should be kept uniform during construction. Therefore, it is important to prevent water leakage from roof color coated ridge tiles. It is recommended that effective measures be taken to address the problem according to the situation.